Installing expansion cards

PCIe Wi‑Fi and Bluetooth card

EN

Restart the lab?

This lab’s progress will be cleared in this browser. The computer returns to the state at the end of the PC case assembly lab.

Getting the workshop ready…

About this lab

Learn to install expansion cards in an assembled computer. In this Eniun PC Lab exercise, you will install a PCIe x1 Wi‑Fi and Bluetooth card. Choose an available slot, remove its rear cover and secure the card. Then attach the antennas and connect the Bluetooth cable to USB 2.0 before closing the case.

We recommend finishing Installing components in the case first. This lab starts from the computer as it is at the end of that lab. You can start here directly if you prefer: it is not an access requirement.

Components in this lab

Safety and preparation

What expansion slots and cards do

An expansion card adds or extends a computer function. It can provide a connection the computer lacks, extra ports, or capabilities beyond those already built into the motherboard.

In a desktop PC, these cards plug into expansion slots on the motherboard. This lab uses PCI Express (PCIe): the card’s gold edge contacts enter the slot to make the electrical connection. A screw secures the metal bracket to the case; it does not replace the PCIe connection. Any external ports on the card are accessible at the back of the case.

Where to install the Wi‑Fi card

The Wi‑Fi card is PCIe x1 and has a short connector. In this build, we install it in the upper short slot because it is free and easy to reach. The graphics card blocks the other short slot.

Other types of expansion cards

What to check before installing a card

The Wi‑Fi and Bluetooth card

Lab sequence

  1. Prepare the computer. With the power disconnected and the antistatic wrist strap in place, remove the side panel.
  2. Wi‑Fi and Bluetooth. Choose the PCIe slot, remove its rear cover, then insert and secure the card, which already has its Bluetooth cable attached. Attach the antennas and connect the free end to a USB 2.0 motherboard header.
  3. Close the case. Check the cables and replace the side panel.

The components are generic. Their connectors, dimensions and assembly sequence follow manuals for equivalent components and the motherboard. The 3D representation is an educational approximation.

Assessment: expansion cards test

When you finish the lab you can check what you have learned with a test on safety before opening the computer, recognising the card, choosing the PCIe slot, what the internal USB cable is for, connecting the antennas and what to check if Wi‑Fi works but Bluetooth does not.

There are 8 questions with a score out of 10. If you get a question right first time you score all its points, and half after one mistake; if you view the solution, that question scores nothing. Attempts are unlimited and, from 7 upwards, you can download a certificate.

Go to the expansion cards test

Your progress is saved only in this browser and is not sent to any server. Privacy and cookies